One of the things I needed to do in this car was restrain the turbo "hat" a little better to keep it from lifting under boost. This is my solution... and I hope it fits under the engine cover... I'll know for sure when Ross comes over later, we will put the cover on.
The left side was easy, no problems here.
The right side.... a few issues. The upper engine mount bolt from the bike was too close to the top to clear a bolt head... solution cut it off about 3/8" making it flush with the side of the motor. Then there is the throttle... This is the side that might be a little close, had to move it out to go around. Ok, yes I know my aluminum welding needs more practice... If it fits it will secure the "hat" as required.
Also looking at ECU mounting.... still hoping to get that, still waiting, if it happens I will be ready, if not the old ECU wiring will run the motor.... so I guess we will see