This was purchased as a complete car missing the engine and trans about 8 years ago. We had it inspected and it met current roll cage standards at that time which called for 2 inch seamless .125 wall tubing. They had us add gussets to the cage and also enclose the cockpit which we did with aluminum panels. The main frame is 2?x4? tube and it?s all very nicely done and square. The body is ?race car good?, in other words it?s not show quality but typical nice quality at Bonneville considering the panels are mounted and dismounted all the time. The basic car shell is straight with a few imperfections and the fabricated nose and other body panels are nicely done. We set it up for a Triumph Rocket III engine and transmission. Pretty specialized obviously, but of course any new engine can be fitted. It has a four link rear with a GM 10 bolt rear axle. It has a 4 link front suspension with a tubular axle. Lots of time into a tidy frame and cage, cockpit closout, and body with very nice chop. Comes with many parts including the chute, at least part of the coolant system, fuel tank, seat, steering, etc. I have extensive photos. Car located in Oregon, I can arrange shipping or trailer to you if in the West. Matt 503-880-2558