Hey guys, doing some prep work in my shop for the exterior. I believe it should be fine as it's all factory parts but I would like to confirm first. I would like to take the front fenders, hood, front bumper, and front lip and mold them all together with high strength epoxy and metal brackets for safety. The goal to this is to prevent the drag seams cause and only allowing the front open area to allow air into the front end. I will be attaching the whole piece back on by using the fender bolts that bolt along the seam of the hood/fenders and some extra bolts between the bumper and fenders.
Seems like a bit of work but I don't mind spending a day to do it. It would also make the car easier to work on being able to take the whole front end off and having complete access to everything. Let me know if this will pass or fail. Thank you in advance for your time and cooperation.