The lakester I'm building currently has a Suzuki GSXR-750 in it. I'm building the frame at this point and I'm trying to make it so that it will also work later with a 'busa motor. Could anyone give me a link to a site that might have the dimensions of it.
Or could someone measure theirs (you don't have to be exact, to 1/2 inch would be fine) and give me the following:
1. Width of the head.
2. The distance from the counter-shaft sprocket/chain center line to the right side and left side of the head. This would be to the plane of the right or left side of the head as if it was projected down vertically to the sprocket height.
3. The distance from the counter-shaft sprocket/chain center line to the further-est right side part of the motor (not the head).
Thanks,
Sum