I guess since nobody has jumped on this post or even got a single response I guess I need to give some additional info about what I am working on. I wanted to keep it under wraps until I could have some detailed information for the motorcycle racers; however, I am working on a design at A2 that would allow motorcycle testing with spinning wheels and yaw capability. I would like the design to be as universal and adjustable as possible to accommodate the widest variety of motorcycles, but without a list of bikes, I don’t know where to cut off the design. I am thinking about the max wheelbase limited to 84” and the range of tires as listed from the table below. To my knowledge I don’t think there is any wind tunnel in the world that has spinning wheel capability for motorcycle testing (if there is could someone respond). This is very important when looking at fender/wheel selection/proximity that I get asked about on a continuous basis. This is also a business case for us as well and without an interest from motorcycle racers we would be hesitant to dump thousands of dollars into a program that you the racers didn’t recognize as a benefit for testing. So again, any help of feed back (positive or negative) with this would be greatly appreciated.