« previous next »
Pages: 1 [2]   Go Down

Author Topic: Question about removing pistons to change displacement  (Read 5042 times)

0 Members and 1 Guest are viewing this topic.

Offline jl222

  • Hero Member
  • *****
  • Posts: 2963
Re: Question about removing pistons to change displacement
« Reply #15 on: August 21, 2009, 01:59:30 PM »
Quote from: John Burk on August 21, 2009, 12:44:35 PM
In maybe 2002 Fred Dannenfelzer's lakester engine looked normal but with E/BFL on the body . They had a 180 deg crank and 4 pistons and the second head to cover the blank holes .

  I'm pretty sure Velasco's made a billet crank for that motor with the correct firing order and the Wesch @ Leggitt E class lakester used bob weights and uneven firing order but not positive. Both haul asz and I remember the Wesch @ Leggitt lakester shaking the ground as it went by.

               JL222
« Last Edit: August 21, 2009, 02:20:14 PM by jl222 »
Logged

Offline SPARKY

  • Global Moderator
  • Hero Member
  • ***
  • Posts: 6912
Re: Question about removing pistons to change displacement
« Reply #16 on: August 21, 2009, 02:08:39 PM »
The variable displacement production car engs just disable the valves---use the cyls as air springs  just stop the valves from operating  Gm fiqures 2% loss due to friction.
Logged
Miss LIBERTY,  changing T.K.I.  to noise, dust, rust, BLUE HATS & hopefully not scrap!!

"Security is mostly a superstition. It does not exist in nature, nor do the children of men as a whole experience it. Avoiding danger is no safer in the long run than outright exposure. Life is either a daring adventure or nothing."   Helen Keller

We are going to explore the racing N words NITROUS & NITRO!

Offline RidgeRunner

  • Sr. Member
  • ****
  • Posts: 843
Re: Question about removing pistons to change displacement
« Reply #17 on: August 21, 2009, 10:01:53 PM »
Quote from: Jonny Hotnuts on August 21, 2009, 12:02:45 PM
I think it would be neat to have engines that snapped together like legos. A "master" engine connected to the drive that could allow an identical engine be bolted to its front and connect to the crank making the engine double in displacement.

     Look at the 2 250 OSSA engines put together for the Yankee 500 M/Cs late '60s-early '70s.  IIRC there were at least a couple independently built with 2 additional cylinders for 1000cc and road raced.

                                 Ed Purinton
Logged
Pages: 1 [2]   Go Up
« previous next »