Willie,
Yesterday we did the layout on a flexplate blowshield for my buddy's lakester and I came home wondering how we were going to make the 4 or 5 required bends in a workmanlike manner using our limited equipment. Read this thread last night and the light went on! Today I checked the "available stock supply" and built a similar version using 1/4" angle iron in place of the bottom rolls and left the tubing off the verticle 1/4" blade. Worked great, made for a fine day. If I ever get West or you get to Maxton, I owe you at least one beverage of your choice. Thank you for the just in time post and Jon for providing the site to make it all happen.
Take care,
Ed Purinton