I'd always planned to run at Speedweek just because they're the same group I used to read about in magazines back in the 60's. So, now that's not going to happen so I'm trying to comply with a whole new set of rules for BMST. And in a hurry! Hopefully one of you will know where I can ask my tech questions but in the meantime I've got some questions.
Do I need firesleeve on my fuel tank's vent line?
Para.7h of the rulebook says the rear wheel must remain visible at all times as viewed from the side. Are they referring to fenders, body panels, etc. or to the riders feet, ankles, legs?
Para. 2N (leathers) makes no mention of speed humps. So are they legal and unrestricted?
Para. 2H says the rider must have 10" between thumbs but also that bars must extend 6" wider than the fork tubes. Is that 6" on each side or
total? (example; if the forks are 10" wide do the ends of the bars need to be 16" apart or 22" apart?)
The body that I built for BNI is totally illegal for BMST
so I'm going to run A/AG (open) and put the body back on for a few runwhatyoubrung passes. One way or another, this thing is going to run at Bonneville!