This is an "A" displacement Duramax V8 engine from SoCal Diesel (441.5ci). It is bored and stroked with custom forged Mahle pistons, billet alloy steel stroker crank, steel main caps, Carrillo I beam custom rods, dual piston oilers, balanced and blueprinted, aluminum 4 valve ported heads with high speed valve train with custom solid roller cam. This engine is superior to the one I ran 197+ mph in a 2500HD 4x4 pickup at Bville with. This can be tuned up past 1700HP, but needs to be tuned lower for LSR. It easily makes over 900rwhp through an Allison truck trans with a mild tune.
It is fresh, zero hours, with shrink wrap. It comes with a 8-lug Ford 9" 2.50" axle for a full sized 3/4 ton truck. It has huge F-450 commercial brakes on it, which will stop on dime at any speed. It also comes with a 90 gallon baffled water tank that weighs 1100lb when loaded, so you don't have to run a radiator. It also comes with like new 18" M/T + Dunlop tires on custom 18" rims.
Price? Here's the tricky part. If you can afford it, you already have one. Cost was >$60,000 for all, and all of it is like new or new.
Looking for a partner. I want it to go into a GM minitruck. You provide the minitruck that is SCTA 2013 spec, and we will both get hats with it. The class it runs in permits minitrucks, but our truck is 6' tall x 6.5' wide with a 4x4 chassis. We can get the aero down to about 1/2 of that, but I cannot afford a new truck. I have complete 200+ mph safety gear including SFI 20 fire, helmet, 38.1, fresh harnesses, etc.
Email a pic of your truck, or your resume and budget to qi@qinsp.com.