lori at web will make you any cam grind you want... depending on power you want. you can get a good little kick by installing an ebay intake cam in the exhaust side and degree them to 104 on the I and 108 on the X . Call Noonan at JE for pistons... there the best! APE for the chain tensioner, Ferrea for the valves and Kibblewight for the springs and retainers. cometic for the gaskets, carillo for the rods, western wrist pin, and factory pro for the shift drum detent unless you want the trans to go into whatever gear it wants to. PBI for the sprockets, barnett for the clutch, dynojet for the power comander, and me for the pressurized airbox and any bodywork you need. that'll 'bout cover it... oh and mooreland if you need someone to put it all together
Kent