Landracing Forum

Bonneville Salt Flats Discussion => SCTA Rule Questions => Topic started by: dave on June 02, 2004, 02:19:00 AM

Title: nitrous vent
Post by: dave on June 02, 2004, 02:19:00 AM

can a nitrous box be vented with a steel braided line or does it need to be a hard line, (steel, alum,) and what diam,  ( #10-12)

Title: Re: nitrous vent
Post by: High Gear on June 02, 2004, 12:05:00 PM

Last year we used alloy tubing from the bottle to a bulkhead fitting in the skin of our linner and had no issues at tech. I think the spirit of the rule is to get the gas out of a closed in area. It seems to me that any method that will stand up to the pressure involved will be OK.
 
 Good Luck,
 
 Gary