Landracing Forum
El Mirage => El Mirage General Chat => Topic started by: McRat on September 12, 2008, 09:06:27 PM
-
What time is the cutoff for tech at El Mirage? Is there tech on Sunday?
I know I have to attend a rookie meeting on Sat at 4pm, do I need the truck there?
-
you will need transportation for the rookie meeting but you can catch a ride with some one ---the vehicle will need a cb radio---no new vehicles will be teched on sunday and no vehicles in the top 25--i think new vehicle means new to el mirage---do not be late for the rookie meeting--its at 4 sharp on saturday at the regristration trailer--i would say that you will have to go through tech saturday 11 to 5 -hope to see you there willie buchta
go to www.scta-bni.org----------------click on el mirage-----------click on el mirage procedures
-
Only a 5% chance I can get the truck ready.
I just need to know what my "surrender" time is.
We will be there even if the truck sits home.
-
i know the feeling sheri and i both killed our bikes at speed week i just finished hers up at 7 tonight i discovered when i had my engine apart i had broken the case sooooooooooo we are bringing sheris bike and mine will be in that cold lonely shop till we return --sheri is making pot roast and noodles for sat night around 6 come on by for a free meal we camp on the return road about 1/4 mile from tech --look for a white mail box willie buchta
-
Willie, really sorry to hear about your engine......
but remember when you replace the cases as per the rules ....no after- market cases allowed!!!!!!!!
-
bob--nice to hear from you--im going to weld the case up only problem is i didnt notice the break until i had the motor assembled all except the heads and the transmission is inside the cases also --its a 02 and newer buell motor and you have to split the cases to get the trans out ---harley made a 1000cc iron head sportster motor with a very long stroke and a small bore--the motor i have has the same bore as the 80 in.evo motor 3.50 in--and the shortest stroke of any harley V twin 3.125 in ---over square--like that small block chevrolet ---we will take sheris bike to el mirage for sunday----hope to see you there willie buchta
-
Well, time for bed, still have alot left to do. Probably not bringing the truck.
-
Nope. Went to fire it up, and there is a problem. I'll bring the family out and watch. :(
-
Got it fixed at 2:00pm, high-tailed it for El Mirage with none of the parts on the front. Threw the parts in the bed.
Got there just in time for the rookie meeting, and got it teched.
Ran 143mph for the rookie run, then right at the end of the day, ran 163.xxxmph for the B/DT record at El Mirage.
-
Good for you. That's sticking with it.
-
doesn't get much better than that, rookie run, then record run... Great day for you. :-D
-
Congratulations!!!!!!!!!!!!!! :cheers:
-
I already told you this on the return road but "NICE TRUCK!!!!!!!!!"
-
Thanks! :cheers:
Here's some "inflight video" http://www.mcratracing.com/k/casperelmirage091408163.wmv
Warning big file.
-
Sounded like you still had a lot left in it. The track looked like it had a few rough spots in it. Nice video thanks.
-
Sounded like you still had a lot left in it. The track looked like it had a few rough spots in it. Nice video thanks.
What was happening at 2/3rd's track was the tires would spin, I would have to ease up, then try again. It took a few tries to get over 150 and stay, and right before the end, it started to hook up again.
Yeah, it's got lots of power, I just can't use it yet. Time to work on the traction and aero.
-
I had the same issue at the same spot on the track. The rpm's would spike up as the tire spun. Made for an interesting ride while banked over into the crosswind :-D