Landracing Forum
Tech Information => Technical Discussion => Topic started by: SALTRACER on September 26, 2004, 05:57:00 PM
-
Can anyone recomend a good shop to regrind the cams in my sho?
-
Bullet did the cam in our U/DT. Very good service.
-
Saltracer;
Seeing you live in nearby Idaho,contact crew chief Cec McCray with the infamous Nish Liner.
I know he's busy right now,but maybe could offer a lead. http://www.nishmotorsports.com (http://www.nishmotorsports.com) for tel number & address. or email cec@nishmotorsports.com ( in Salt Lake City)
Good Luck
Tom Shannon
Magna, Utah
-
You might try: Chet Herbert in Anahein, CA, if you know how you think you want the cams reground.
On my 2.3 Ford Cam, I'm happy with the events, but want more lift.Chet is going to plot the cam,and let me know what can be done. If the new grind works for me,but if I still want more lift, he will make me a billet cam, if needed.
Chet Herbert Race Parts
1933 S Manchester
Anaheim CA
Phone: 714-750-1211
Fax : 714-750-6224
-
Thanks for the information. I will check into each of these places and go from there.