Landracing Forum
Tech Information => Technical Discussion => Topic started by: jdincau on April 06, 2019, 03:50:11 PM
-
I can't find anything in the archives about this subject. I can't believe we haven't beat this horse before.
What oil are you running in your 4 stroke, water cooled, normally aspirated, automobile engine on gasoline?
-
Schaeffers 20-50 racing oil
-
4 Gals. of 30wt. Red Line Racing
Chris
-
I'll ask for a clarification. What do you want - our grocery-getters or our race vehicles?
-
Sorry, race car.
-
On my old motor I find Valvoline VR-1 20/50 works best but the mileage I get between oil changes really sucks for some reason. :cheers:
-
BG Shearpower 15-40 full synthetic... it is usually a diesel oil, but it is great for the Hayabusa....
-
Old school all-aluminum blown alky DOHC hemi four, large clearances (.004"-.005" both rods and mains)- 10 qt. #40 PennGrade1.
Oops- I see that you asked about naturally aspirated engines. Sorry.
-
430 inch BBC. .003 bearing clearance. 15/40 Shell Rotella
Ted
-
383 Donovan SBC aluminum block. Mobil 1 synthetic.
Regards, Neil Tucson, AZ
-
I used Chevron Delo (10-50?) in my small block in the 1960s. I ran at AHRA, NHRA and SCTA events, from 1/4 to 1.5 miles. I turned as much as 9,000 rpm at the drags and never had a problem. BTW I also ran Delo on the street 8-)
-
Royal Purple XPR 5W-30. shifting at 10200, 9500 in the lights.
-
358 Ford NA 8500 rpm. 15/50 mobile 1. 22.88 a gallon at Walmart.