Landracing Forum
Tech Information => Technical Discussion => Topic started by: ggl205 on May 15, 2017, 02:59:21 PM
-
OK, I did a search for this question and I am sure there is a reference to it but just couldn't find it. Here goes: what has been the best device to use at end of a push bar? I have seen a few things that look good but I hope to hear from actual users.
John
-
The best thing that I have found that can take the abuse is steel wheels from a floor jack--build the push bar hell for stout in my opinion mine is 1 3/4" .134 wall tubing that fits inside of 2 inch tubing with a 2"collar on the 1 3/4"part that I can remove that has the wheel---shied the bolt so that the chute & lines can't foul on the wheel axle bolt--- :roll: yeah I know
-
Try these. I have one that fits inside a 2" round tube.
Sid.
https://www.google.com/search?q=conveyor+ball+rollers&rlz=1C1OPRB_enUS639US639&oq=conveyor+ball&aqs=chrome.0.0j69i57j0l4.12790j0j7&sourceid=chrome&ie=UTF-8#q=conveyor+ball+rollers&tbm=shop
-
A recent thread: http://www.landracing.com/forum/index.php/topic,15788.0.html
-
McMaster Car #7796K84
-
I just have a push bar. No moving parts. Works great.