Landracing Forum

Tech Information => Technical Discussion => Topic started by: dr j on June 17, 2013, 11:16:43 PM

Title: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
Post by: dr j on June 17, 2013, 11:16:43 PM

I am building a small fuel tank for my LSR bike.  It will be aluminum and I am looking for a non-recessed but vented cap and aluminum weld-in bung.  I used an ACS flush fuel cap 10600 from Aircraft Spruce on my last build.  But it was too recessed and prevented my using the full capacity of the tank.  Any specific ideas?
Thanks

Title: Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
Post by: Peter Jack on June 18, 2013, 01:18:34 AM

That's such a nice cap assembly, is it possible to design your tank with a raised portion in which to mount the assembly?

Pete

Title: Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
Post by: saltwheels262 on June 18, 2013, 07:44:11 AM

summit and jegs have caps with bungs. aluminum.

the bungs can be shortened to sit flush with the top of your tank.

franey

Title: Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
Post by: Old Scrambler on June 20, 2013, 08:03:01 PM

Monza-Style flip-lid on ebay..........numerous vendors in UK and Continent offer 2 sizes with weld-bungs.