Landracing Forum
Fundraising, For sale, and Wanted => Items Wanted => Topic started by: NathanStewart on July 24, 2012, 11:49:42 AM
-
Have a project here at work and need to be able to start and run a late model 6.1L Hemi on a test stand. Definitely at least need a bellhousing but also looking for a flywheel and starter as well. Apparently the late model motor has the same bellhousing bolt pattern as the 318/340/360 Magnum motors.
If anyone has some leads please let me know. Definitely looking for something local. Thanks!
-
Definitely looking for something local. Thanks!
For those that don't know where you live -- local to where?
Larry
-
So Cal. LA/OC area. Thought that was part of my profile information. Guess I'll update that.
-
Still looking.
-
http://www.summitracing.com/parts/DCC-5153602/ (http://www.summitracing.com/parts/DCC-5153602/) ???
Mike
-
Have a project here at work and need to be able to start and run a late model 6.1L Hemi on a test stand. Definitely at least need a bellhousing but also looking for a flywheel and starter as well. Apparently the late model motor has the same bellhousing bolt pattern as the 318/340/360 Magnum motors.
If anyone has some leads please let me know. Definitely looking for something local. Thanks!
Okay - I have some of this stuff.... I have at least ONE bellhousing (probably two) for both large and small flywheels/clutches... NOW.... does the flywheel match the earlier 318/360 bolt patterns on the crank and, if it does, there are a few starters here?.... jeez.... I figured that, with about half or more of the population of ALL OF CANADA within less than 100 miles of you, you'd find lots of this stuff.....