Landracing Forum
East Coast Timing Association => ECTA Rules Questions => Topic started by: micromaniac on September 19, 2011, 11:39:01 AM
-
I know the rules say either 3 dzus fasteners or 6 machine screws to mount wheel discs. My wheels are set up perfect to use 4-1/4 inch grade 8 bolts to mount them. Would this be a problem passing tech? Or would I be alright to mount them this way? Thanks for your help with this matter.
-
You would not pass tech at an SCTA event. I'm also going to guess that it wouldn't pass the muster at an ECTA either. The rule say's 3 Dzus or 6 fasteners just as you said.
-
You would not pass tech at an SCTA event. I'm also going to guess that it wouldn't pass the muster at an ECTA either. The rule say's 3 Dzus or 6 fasteners just as you said.
Like he said. 3Dz or 6 screws rules is rules.
-
Show us a picture of those FOUR 1/4" bolts and how they mount ? the rim/wheel and the moon discs ?
Charles
-
Thanks for the replies decided to just use 4-dzus fasteners instead of the bolts.Its better to stay within the rules instead of creating controversy. Thanks again
-
Great Idea