Landracing Forum

Tech Information => Technical Discussion => Topic started by: maguromic on September 03, 2010, 10:23:50 PM

Title: ’32 Ford Rails Dimension
Post by: maguromic on September 03, 2010, 10:23:50 PM

Any one has the inner rail to inner rail dimension in the engine compartment on stock (non pinched) ’32 Ford rails?  Tony

Title: Re: ’32 Ford Rails Dimension
Post by: interested bystander on September 03, 2010, 10:54:09 PM

You might try Roy Fjastad. 777 AGRMR @ Full Bore  (the hex dzus fastener guy) - he started the Duece Factory making '32 replica rails 30 or so years ago.

You can buy some fasteners, too!!!

Title: Re: ’32 Ford Rails Dimension
Post by: 4-barrel Mike on September 04, 2010, 12:35:49 AM

How about: http://www.wescottsauto.com/WebCatalog/FrameDiagram1932.pdf (http://www.wescottsauto.com/WebCatalog/FrameDiagram1932.pdf) ?

Mike

Title: Re: ’32 Ford Rails Dimension
Post by: maguromic on September 04, 2010, 12:42:04 AM

Quote from: 4-barrel Mike on September 04, 2010, 12:35:49 AM

How about: http://www.wescottsauto.com/WebCatalog/FrameDiagram1932.pdf (http://www.wescottsauto.com/WebCatalog/FrameDiagram1932.pdf) ?

Mike

Thanks this is what I needed.  IB, I forgot about Roy and the '32 rails, I need to call him on Tuesday about some other things.  Tony