Landracing Forum

Tech Information => EFI Questions => Topic started by: Unforgiven on February 09, 2018, 11:49:10 PM

Title: Buell FI related question
Post by: Unforgiven on February 09, 2018, 11:49:10 PM
I am using a 2008 Buell XB9 for a build and want to keep the FI but I can't find an aftermarket programmable ECU. I have the stock unit but it can't be hacked and I have a few options from NOS Eric Buell units, but none are programmable. Would a Power Commander work ? And before I proceed, is FI legal in MP partial streamlined Pushrod gas. Thanks.
Title: Re: Buell FI related question
Post by: WCJonesJr on February 10, 2018, 07:30:09 AM
Check out

http://www.daytona-twintec.com (http://www.daytona-twintec.com)
Title: Re: Buell FI related question
Post by: Unforgiven on February 11, 2018, 09:53:57 PM
Thanks WC. Wasn't sure Twintec had a unit for the FI bikes. I'm sorta stuck on carbs. This Buell engine is the first FI motor I ever had. Basically the same thing as a 2008 xl engine. 'Cept for the case design and some other things Eric designed. Still a sportster engine. Thanks man.
Title: Re: Buell FI related question
Post by: firemanjim on February 12, 2018, 12:29:09 AM
No PC, but 08  Buell can be tuned with the newer ECM-Spy set up. Done a bunch with this. Be advised, you must donate to get the program and it is then locked to the computer you send the e-mails from, so make sure it is the tuning laptop. Call me anytime if you need help with it. 707 548-7906
Title: Re: Buell FI related question
Post by: Bookfla on February 12, 2018, 02:27:12 PM
Master Tune makes a very good product for Harley ECU management. You could call them to find out if they have options for you on the Buell. Their products are model specific.
Title: Re: Buell FI related question
Post by: firemanjim on March 02, 2018, 12:01:16 AM
No Harley unit will work.
Title: Re: Buell FI related question
Post by: mergatroyd on July 13, 2018, 02:54:43 AM
You could also look into Microsquirt and Nemesis. I think Nemesis is brand specific. With a Microsquirt, you have to learn a lot of fundamentals, but the guys at DIYAutotune and the MSEFI forums are very helpful.