Thanks Mike! I didn't know something like that even existed!
The fuelie roller cam is almost done! Here is the latest from Dema:
Hello! We just got it back from the heat treater and i got it straight and will finish the mains and lobes to size. The lobes should finish @1.360" the lobe centers are 112 the int lobe lift=.5105" and the exh = .506" as soon as the finish grind is done I'll plot the cam and give you the durations at the end of the ramp and at .050" and at .100", .200", .300" That should be t the end of the day today. Dema