I picked up the JD2 model 3 bender from my friend Eric.... the 7.5 inch CL radius die set showed up, so I made my first bend. The calculations said start with 57.4 inches of tube... I decided to play it safe and did 60, bent the tube, cut the legs off since there was extra on both and here we are....
I need to cope the bottom of the legs, then the cross bar a little for the hoop and I think I have the back of the hoop ready to weld in.... or at least tack in.
The bender did a nice job on the bend. Front hoop next after that...