So, I was looking into hood scoops for my Charger build. Currently running a 383ci NA. Rules say 11" high, can start at the leading edge of my hood at stop short of the windshield (distance depends on whether it is forward facing scoop (1/2") or rear facing (2"))). If a cowl induction style scoop would be used, rule state it has to be completely open at the back. This is a tremendous amount of air getting forced into the engine compartment. The engine alone would not likely consume all of the air at speed and bunch up, causing high drag. For a forward facing scoop it doesn't mention inlet size. It seems to me, an 11" tall, hybrid cowl style scoop with a forward facing inlet, sealed to the intake pan, would be the best of all styles, seeing that I can then size the inlet and be within 1/2" of the windshield.... yes?