Landracing Forum
Tech Information => Technical Discussion => Topic started by: Jon on March 30, 2012, 05:00:57 PM
-
Hi
If anyone has a Hayabusa that they could measure please I'm after the offset distance of the chainline.
It doesn't have to be spot on, I just want to make sure I make my swingarm wide enough.
Chainline offset from the centre of the wheel or swingarm inside measurements and chainline to inside of swingarm would be great.
Thanks
Jon
-
g`day Jon, i slotted a Hayabusa wheel into the Turboed Kawasaki that i ran at Gairdner in 04,,, from my notes, center of rim to sprocket center 129.5mm,, sorry cant supply swingarm to sprocket,( had constructed a swingarm to adapt the wheel in the KZ frame), but, from memory, about 25mm,,, 8-)
-
Thanks Stay'Tee