Sh!!!t.
Well the good news is we werent on the computer most of the day.
. And we gor some things done.
We had to put five holes in the bumper and this picture shows the first two that are for the push bar.
This picture shows the bumper on with the push bar holes done and hole 3 and 4 being fitted. If you look at the brackets under the spoiler you will see some blue tape. Yep thats hole 3, four is on the other side.
And the last hole is complete, this is the parachute attachment hole. Approximately the height of the cam.
The rear end is almost complete, all we have to do is replace the metal tube that the chute cables go through.
Here is a picture of a nearly installed bumper.
Since we still had some daylight left, we worked on our scoop
A little.
Normal size.
Cut down! Now that's an opening, Jk.
They correct half, cut down some.
Cut some more.
A little more.
Can't do any cutting on the inside, too much fiberglass dust. Started getting too dark. So we had a good day and it ended with this.