The Triumph is coming along. All the street stuff is off, all bolts checked for tightness, it is regeared, taped up, coated with preservative and ready to be dressed with the tail, fender, and fairing. The fairing went on this afternoon. It is a bit narrow. The lever ends hit the sides and there is only a half inch clearance between the bar ends and the sides. Fortunately I made the side panels removable so I could comply with FIM rules. The FIM requires that the rider be visible from the sides. I will take them off and this will fix the clearance problem for now. This winter I will widen the fairing so I can use it with side panels.