WOW what a FLASHBACK!!!!!!!!!! shades of the early sixties,, heads from one, crank from another, the block from a third this thing is going to be so much fun, we are using parts we got from salvage yards
as opposed to my 565 which started out as a 509---everything in it was AFTERMARKET
This little girlie motor is old school it is an Ebay--- Craigslist special
John and I took the third USED LS 6.0 motor apart, I have to make a mid-plate and drill the trans mounting bolt hole and tap it do a recommended mill pass in the rear of the block to tie the two main lifter galleys together--then order the pistons and bore the block..
Talked to Spud at FIE in or. about the mag. We are going to run this puppy with a mag and a blow through carb so we can learn to run motors for CLASSIC.