I think I´ll stick to my thrash metal, but thanks for the link!
Here are the pics from last nights work, I modified the rear axle blocks to hold an M8 bolt for chain adjustment.
A pair of steel plates were made to fit the frame and complete the adjuster, I will weld them fully later when the frame is stripped and back in the frame jig.
Another mini project is to make the battery box, I will continue with that next time I go to the workshop.
Finally I removed the masking tape from the windshield, apparently the tape can get stuck if it is left on too long and it did leave some marks that I will have to remove with some solvent that doesen´t damage the plastic windshield.
Cheers!
/Anders