I think I asked you this before Tony...............what would it take to homebrew a drysump for the rearend?
Trent, Other than time these are the specs and parts list from one of my previous posts, the hardest part was the 12-volt motor. I believe Vickers is now part of Eton, so you could probably cross reference the part number.
SpecsThe pump is geared to turn 1250 rpm.
Timing belt ratio is 72:22.
Motor is rated 1/4 hp at 4100 rpm and 1/3 hp at 3600 rpm.
40% of the oil going back to the 9" is returned back to the tank (this is adjustable with the flow valve).
The spray nozzle is similar to an injection nozzle in that it sprays a fan pattern at the gears.
Parts List1 Two stage pump (mine is a Johnson HTP unit with a .800 gear)
1 12 volt electric motor (mine is a Vickers made in Italy part # 9919 123 90023)
1 needle valve -McMaster-Carr # 4995K15
1 72 tooth pulley (style B) - Grainger # 2L534
1 22 tooth pulley (style A) - Grainger # 2L523
1 Gilmer style belt - Grainger # DHJ5 (better