Here's a bit of news from Dan Warner. Please read and note if you're planning on running bike at an SCTA or USFRA-sanctioned event in 2011:
The Motorcycle Technical Committee has been working on 3 rule clarifications. This is how Tom and the Inspectors have
interpreted the rules for some time. This will stop some confusion and make an even playing field.These are NOT RULE CHANGES.
RULE CLARIFICATIONS:
7.E Factory installed options are acceptable.
Distributor or Dealer installed OEM options & accessories are NOT acceptable.
7.E.1.12 Front and rear sprocket number of teeth is optional. You must RETAIN OEM chain size.
7.E.1.2 Passenger footrests and brackets shall be removed. Brackets must be retained if holding a muffler or other part
other than the footrest.
The Motorcycle Technical Committee has been working on 3 rule clarifications. This is how Tom and the Inspectors have
interpreted the rules for some time. This will stop some confusion and make an even playing field.These are NOT RULE CHANGES.
RULE CLARIFICATIONS:
7.E Factory installed options are acceptable.
Distributor or Dealer installed OEM options & accessories are NOT acceptable.
7.E.1.12 Front and rear sprocket number of teeth is optional. You must RETAIN OEM chain size.
7.E.1.2 Passenger footrests and brackets shall be removed. Brackets must be retained if holding a muffler or other part
other than the footrest.