1.Edel Victor Jr single plane #2975--no cracks,welds,repairs,stripped bolts,or erosion, Cherry manifold--$150.00 obo ($215 @ Jegs)
2.Edel Performer-#2101 dual plane,no egr,condition same as above--$75.00 obo ($130 @ Jegs)
3.New,,SBC Polished front cover with new seal & timing pointers,one is adjustable--$30.00 obo ($53 @ Jegs)
4.Cast iron thermostat housing(the kind that dont leak) with throttle spring return tab,& 1/8th pipe plug in top (for bleeding cooling system when refilling)--$25.00 obo
5.New, chrome old school headlight eyebrows for lowriders or whatever,,they fit the old round sealed beam headlamps--$10.00
6.Chevy HEI dist,,weights aren't frozen,vac adv works and a bunch of extra weight springs--nice used part--$30.00 obo
7.SBC (350) 6-3/4 balancer with lower pulley,decent shape,hasn't slipped,--$30.00 obo
8.Show Polished,2" carb spacer for 4150-4160 carbs-(std Holley/Edelbrock) This is an OFFY part that was on my street rod.The guy at the polishing shop removed the OFFY logo,,I was pissed.--$50.00 firm,,,beautiful piece.
9.Winters quick change gear cover,magnesium,# 6588-needs brngs & o-rings still avail,,small crack but usable-$20.00 obo
10.Chrome stuff,,This is a fan,pulley & 2/5/8" spacer for a 153CID Chevy II 4 cyl.Parts came from a display/cutaway engine where I used to work.Plating is WAY above average,nothing bent.
The chrome rocker arms are from the same engine,as are 1 intake & 1 exhaust valve,,engine was never ran on gas or in a car,so all these parts are basically new.
11.2' & 1" carb spacers,,the "2" is cast alum(nice) the 1" is okay,but a lot of zinc content--$30.00 obo for both
12.331-354 rods,#1324222--no signs of spun bearings,or any damage at all,,nice stock pieces--$100.00 obo
All parts are + shipping from SoCal(Long Beach)
I dont do ebay or craiglist.
Ive bought & sold parts on the HAMB without any problems.Any questions send me a PM,,thanks LSR for the space!
Troy