Canopy latch on the other side took two tries just like the other side
---I guess my brain and fab skills don't mirror image very well
But progress was made---While I was doing canopy latches and spool gun ( 1/8 to 1/8 17V and 4.7 wire speed) Andy made a bracket for the MSD mount. We now have spring loaded positive latches on both sides mounted to the sub frame.--- lift struts, skin, and windows to go
Sunday Andy and I are going to take the car section by section and get it on paper; then system by system on paper and make a car book.
After we get this done and the car gets finished from the back end to the back of the eng. bay . Then pull the motor and start moving
"stuff" from the 565 NA motor to the 509.
Still looking for the camera---the house warden was through here---lol