Author Topic: Pinion angle with 2 piece driveshaft.  (Read 23603 times)

0 Members and 1 Guest are viewing this topic.

Offline javajoe79

  • Sr. Member
  • ****
  • Posts: 618
Re: Pinion angle with 2 piece driveshaft.
« Reply #15 on: September 30, 2011, 10:53:12 PM »
So to update this. We ran with the shafts set up as described above. It all worked great. Smooth as could be.
Traction was great too. We could accelerate hard from the top of 2nd gear through 4th with 675whp.
We ultimately ran 223mph out the back door and got the record. Thanks for the input guys    :cheers:
« Last Edit: September 30, 2011, 10:55:35 PM by javajoe79 »
Coffey Fabrication and Race Prep
313 Wilhagan Rd Nashville, TN 37217
615-210-1605

https://www.facebook.com/CoffeyFabrication