Author Topic: ’32 Ford Rails Dimension  (Read 1553 times)

0 Members and 1 Guest are viewing this topic.

Offline maguromic

  • Hero Member
  • *****
  • Posts: 1736
    • http://www.barringtontea.com
’32 Ford Rails Dimension
« on: September 03, 2010, 10:23:50 PM »
Any one has the inner rail to inner rail dimension in the engine compartment on stock (non pinched) ’32 Ford rails?  Tony
“If you haven’t seen the future, you are not going fast enough”

Offline interested bystander

  • Sr. Member
  • ****
  • Posts: 997
Re: ’32 Ford Rails Dimension
« Reply #1 on: September 03, 2010, 10:54:09 PM »
You might try Roy Fjastad. 777 AGRMR @ Full Bore  (the hex dzus fastener guy) - he started the Duece Factory making '32 replica rails 30 or so years ago.

You can buy some fasteners, too!!!
5 mph in pit area (clothed)

Offline 4-barrel Mike

  • Hero Member
  • *****
  • Posts: 3173
  • Any fool can drive a V8
Re: ’32 Ford Rails Dimension
« Reply #2 on: September 04, 2010, 12:35:49 AM »
Mike Kelly - PROUD owner of the V4F that powered the #1931 VGC to a 82.803 mph record in 2008!

Offline maguromic

  • Hero Member
  • *****
  • Posts: 1736
    • http://www.barringtontea.com
Re: ’32 Ford Rails Dimension
« Reply #3 on: September 04, 2010, 12:42:04 AM »
How about: http://www.wescottsauto.com/WebCatalog/FrameDiagram1932.pdf ?

Mike

Thanks this is what I needed.  IB, I forgot about Roy and the '32 rails, I need to call him on Tuesday about some other things.  Tony
“If you haven’t seen the future, you are not going fast enough”