Pontiac 4 cyl SD engine components. These engines were used extensively in midgets, marine and drag applications and are a true race engine. The block is .020 overbore and has bronze lifter bores and roller cam bearings. Head studs and main bolts are there. Head is a completely developed competition eliminator drag race piece that was done by Judson Massengale of Popular Hot Rodding engine master fame. This engine made over 360 hp in F-Econo dragster trim. I basically have a complete engine, less pan and carbs. The head has titanium valves and retainers, Jessel roller rockers. It comes with two roller cams and roller lifters, I also have an adapter plate to allow it to be bolted to a Power Glide or turbo trans,I also have an adapter and valve cover required for this engine, a GM Performance forged crank, two sets of rods,pistons, as well as a box full of engine hardware. I bought this engine originally to be used in a Bonneville land speed car, then a friend was going to use it in a midget until they outlawed the super duty engine in the classic category. The fella I bought this engine from had over $20,000 invested in it when he was running it at 8.36 at 160 mph in the quarter mile. $2,500. Call George at 360.481.3368.
I have access to a discount freight company through my machine shop and won't charge anything other than the actual shipping cost. I will work with you to get the best deal, but expect to pay up to $300 if you live on the other side of the country, as I am in Western Washington.