Author Topic: El Mirage Update  (Read 34744 times)

0 Members and 1 Guest are viewing this topic.

Offline desotoman

  • Hero Member
  • *****
  • Posts: 2816
Re: El Mirage Update
« Reply #90 on: November 18, 2009, 01:30:20 AM »
If it is illegal to put an OHC setup on a set of Ardun's, or a Wayne and run in XXF or XXO, it should be illegal to put a OHC on a vintage 4 overhead. The same set of rules should apply to all Vintage Motors. IMO

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.

Offline jimmy six

  • Hero Member
  • *****
  • Posts: 2788
Re: El Mirage Update
« Reply #91 on: November 18, 2009, 09:31:38 AM »
I beleive it's because OHC conversions were available in the 30' and 40's. There none (OK very few) for the other vintage engines. Today new heads are being adapted to V4 engines.

IMO XF, XO,XXF & XXO engines should be left as they are............JD
First GMC 6 powered Fuel roadster over 200, with 2 red hats. Pit crew for Patrick Tone's Super Stock #49 Camaro

Offline desotoman

  • Hero Member
  • *****
  • Posts: 2816
Re: El Mirage Update
« Reply #92 on: November 18, 2009, 12:30:58 PM »
JD,

Thanks for the clarification. I guess I get confused where in the rule book it states "For reasons of economy and historical authenticity, Vintage engine modifications are restricted to older technology levels, so far as practical."

Tom G.
I love the USA. How much longer will we be a free nation?

Asking questions is one's only way of getting answers.

The rational person lets verified facts form or modify his opinion.  The ideologue ignores verified facts which don't fit his preconceived opinions.

Offline petercalaguiro

  • Jr. Member
  • **
  • Posts: 47
  • May 2015
Re: El Mirage Update
« Reply #93 on: November 19, 2009, 03:37:25 PM »
Anyone get a picture of Jack Bateman's new XF/CC?
Peter
02G0250

Offline willieworld

  • Hero Member
  • *****
  • Posts: 1818
Re: El Mirage Update
« Reply #94 on: November 19, 2009, 05:24:48 PM »
go to         www.thegeargrinders.com                 go to the november meet there are quiet a few

        willie buchta
« Last Edit: November 19, 2009, 05:27:28 PM by willieworld »
willie-dpombatmir-buchta

Offline John Noonan

  • Hero Member
  • *****
  • Posts: 3606
  • 306 200+ mph time slips. 252 mph on a dirtbike
Re: El Mirage Update
« Reply #95 on: November 19, 2009, 05:27:44 PM »
go to         wwwthegeargrinders.com                 go to the november meet there are quiet a few

        willie buchta


www.thegeargrinders.com


 :-D

Offline willieworld

  • Hero Member
  • *****
  • Posts: 1818
Re: El Mirage Update
« Reply #96 on: November 19, 2009, 05:30:31 PM »
thanks john    i think i hit the comma insted of the dot   all fixed          willie buchta
willie-dpombatmir-buchta

Offline petercalaguiro

  • Jr. Member
  • **
  • Posts: 47
  • May 2015
Re: El Mirage Update
« Reply #97 on: November 19, 2009, 05:42:46 PM »
Thanks, Jack will appreciate the pictures. His first time and attempt at LSR.
Peter
02G0250

Offline willieworld

  • Hero Member
  • *****
  • Posts: 1818
Re: El Mirage Update
« Reply #98 on: November 19, 2009, 06:56:53 PM »
Funny story...A guy named Mike calls me from Texas and says he's a Gear Grinder from San Antonio Texas. He's not an SCTA Gear Grinder, he belongs to the Gear Grinders car club in San Antonio, Texas. He wants to know if I can send him a Gear Grinder T-shirt and plaque and he would do the same. Which we did. That was just before Bonneville(which Sheri has worn every event since then). So Saturday a guy walks through my pit with a San Antonio Gear Grinder T-shirt on. And I say "Hey man, where did you get that shirt?" In which he replied that he got it in San Antonio and he's a member of the club there. So I said "Don't tell me that your name is Mike" and he said "No my name is Clarence" and he says that he knew the story about the t-shirt swap and he said as a matter of fact "I want to get a t-shirt and a plaque as well." So we made a deal, he bought two shirts, I bought him a plaque and he gave me a hat. He said he was there with his friend Jack and they had a long nose,severely chopped coupe that they were going to run. A couple of real nice guys that I really enjoyed talking with. They had to leave early Sunday, but it was a pleasure visiting with them and I look forward to seeing them in Bonneville in 2010.
It's a small,small world.
Willie
willie-dpombatmir-buchta

Offline fredvance

  • FVANCE
  • Hero Member
  • *****
  • Posts: 2297
    • Vance and Forstall Racing
Re: El Mirage Update
« Reply #99 on: November 19, 2009, 08:27:18 PM »
The Gear Grinders of San Antonio has been around since the fiftys at least.
WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing

Offline willieworld

  • Hero Member
  • *****
  • Posts: 1818
Re: El Mirage Update
« Reply #100 on: November 19, 2009, 08:40:22 PM »
19 51                                          willie buchta
willie-dpombatmir-buchta

Offline Glen

  • Global Moderator
  • Hero Member
  • ***
  • Posts: 7024
  • SCTA/BNI timer 1983 to 2004, Retired,. Crew on Tur
Re: El Mirage Update
« Reply #101 on: November 19, 2009, 08:54:21 PM »
I spent quite awhile with Clarence on Saturday and send him a couple of our Gear Grinder decals. Good people, they worked real hard to get the coupe thru tech but I think they ran out of time.
Glen
Crew on Turbinator II

South West, Utah

Offline theazoldcrow

  • Sr. Member
  • ****
  • Posts: 843
  • Yup!
Re: El Mirage Update
« Reply #102 on: November 20, 2009, 10:04:56 AM »
 :-D Glen,  I think they at least got one run in, don't know what they timed but did see them go down the course.     Crow.
The Earth, is an intergalactic insane asylum.!

Offline Glen

  • Global Moderator
  • Hero Member
  • ***
  • Posts: 7024
  • SCTA/BNI timer 1983 to 2004, Retired,. Crew on Tur
Re: El Mirage Update
« Reply #103 on: November 20, 2009, 10:41:48 AM »
Crow could be I left about noon on Sunday.I'll check it out. They did go down the course at 15.993mph. At least after their hard work they probably felt good about that after the long trip and hard work. Good to see it.
« Last Edit: November 20, 2009, 10:44:44 AM by Glen »
Glen
Crew on Turbinator II

South West, Utah

Offline jimmy six

  • Hero Member
  • *****
  • Posts: 2788
Re: El Mirage Update
« Reply #104 on: November 20, 2009, 11:34:55 AM »
So Willie...The SCTA Gear Grinders will sell Club Tee-Shirts and Plaques to anyone.....
First GMC 6 powered Fuel roadster over 200, with 2 red hats. Pit crew for Patrick Tone's Super Stock #49 Camaro