Author Topic: Reduce air compressor noise.  (Read 18481 times)

0 Members and 2 Guests are viewing this topic.

McRat

  • Guest
Reduce air compressor noise.
« on: June 17, 2009, 02:02:32 AM »
Compressor too loud?  Take a piece of old carpet the height of the tank, and 3 times it's diameter in length.  Wrap it around the tank, fuzzy side inwards.  Punch holes in it to zip tie it on.  Drops noise 50% or more.   I'll post pics if anyone needs them.


Offline floydjer

  • Hero Member
  • *****
  • Posts: 4249
  • "There is no duck side of the moon..."
Re: Reduce air compressor noise.
« Reply #1 on: June 19, 2009, 02:01:31 PM »
I mounted mine on rubber cushions that I made from 3 of those "replacement"  bolt -in core plugs (freeze plug) Drilled through them and lag bolted them to the floor. Made a huge difference.  J.B.
I`d never advocate drugs,alcohol,violence or insanity to anyone...But they work for me.

Offline Seldom Seen Slim

  • Nancy and me and the pit bike
  • Administrator
  • Hero Member
  • ***
  • Posts: 13164
  • Nancy -- 201.913 mph record on a production ZX15!
    • Nancy and Jon's personal website.
Re: Reduce air compressor noise.
« Reply #2 on: June 19, 2009, 02:04:14 PM »
I haven't run the compressor much since installing it -- and it's still on the wooden skid on which I got it.  I'm thinking of using hockey pucks for the rubber mount.  They're hard rubber, the right size, and cheap (up here at least).  Anyone tried them -- and have reasons why or why not?
Jon E. Wennerberg
 a/k/a Seldom Seen Slim
 Skandia, Michigan
 (that's way up north)
2 Club member x2
Owner of landracing.com

Offline Peter Jack

  • Hero Member
  • *****
  • Posts: 3776
Re: Reduce air compressor noise.
« Reply #3 on: June 19, 2009, 02:11:01 PM »
I use hockey pucks on my compressor in the shop. Works really well. No trouble finding them in this part of the world!

Pete

Offline fredvance

  • FVANCE
  • Hero Member
  • *****
  • Posts: 2297
    • Vance and Forstall Racing
Re: Reduce air compressor noise.
« Reply #4 on: June 19, 2009, 02:39:31 PM »
Probably be pretty hard to find around here. :roll:
WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing

McRat

  • Guest
Re: Reduce air compressor noise.
« Reply #5 on: June 19, 2009, 03:35:13 PM »
Yup, I had some old rubber machine cushions I bolted to the feet as well.  While it didn't stop the "ringing" noise the tank made, it did reduce the vibrations in the floor and walls.  Nothing is more irritating than watching your dial indicator start dancing when the compressor comes on.  I put the compressor in a closet, put in an electric bathroom vent fan up top to evacuate the hot air (only comes on with the compressor on), put a solid core door on the closet, and cut 1" off the bottom of the door to allow fresh air in for the fan.  Came out pretty quiet but only after the carpet trick.  The Craftsman 80g vertical compressor I used was twice as loud as my old Ingersoll Rand T30.  Guess you get what you pay for.

Offline saltwheels262

  • Hero Member
  • *****
  • Posts: 1085
  • LTA 7/2013
Re: Reduce air compressor noise.
« Reply #6 on: June 20, 2009, 09:51:39 AM »
i used a thick, big truck mud flap under a 60 gal.
tank. don't know how much good it did.

comp. is in basement. doesn't take up garage floor space,
very little noise and cold winter start ups at lake erie are avoided.

will try some of the suggestions.

franey
bub '07 - 140.293 a/pg   120" crate street mill  
bub '10 - 158.100  sweetooth gear
lta  7/11 -163.389  7/17/11; 3 run avg.-162.450
ohio -    - 185.076 w/#684      
lta 8/14  - 169.xxx. w/sw2           
'16 -- 0 runs ; 0 events

" it's not as easy as it looks. "
                            - franey  8/2007

Offline Dr Goggles

  • Hero Member
  • *****
  • Posts: 3120
  • The Jarman-Stewart "Spirit of Sunshine" Bellytank
    • "Australian Bellytank" , http://thespiritofsunshine.blogspot.com/
Re: Out ye Spambot
« Reply #7 on: July 02, 2009, 11:06:37 PM »
A gas compressor is a mechanical device that increases the pressure of a gas by reducing its volume. Compressors are similar to pumps: both increase the pressure on a fluid and both can transport the fluid through a pipe. And electric fan, I guess?

Shower us with thine infinite wisdom oh holy Spambot.Then, bugger off and don't come back.


_________________
Ceiling fan
Few understand what I'm trying to do but they vastly outnumber those who understand why...................

http://thespiritofsunshine.blogspot.com/

Current Australian E/GL record holder at 215.041mph

THE LUCKIEST MAN IN SLOW BUSINESS.

Offline interested bystander

  • Sr. Member
  • ****
  • Posts: 997
Re: Reduce air compressor noise.
« Reply #8 on: July 02, 2009, 11:16:12 PM »
My compressor is a noisy b###h, but since none of my neighbors speak my language, I don't worry about the noise.

I wouldn't know if they were complaining or not.
5 mph in pit area (clothed)

Offline Ron Gibson

  • Sr. Member
  • ****
  • Posts: 770
Re: Reduce air compressor noise.
« Reply #9 on: July 03, 2009, 10:00:37 PM »
I put an old chevy air cleaner with one of those little snorkels on mine. Replaced the horse hair or whatever it was filter. Eliminated the pulse noise of the intake.
At a shop I used to work at, we ran the intake through the wall to the outside, made a weather cover for rain, snow,  made a big difference in noise.

Ron
Life is an abrasive. Whether you get ground away or polished to a shine depends on what you are made of.

Offline bearingburner

  • Sr. Member
  • ****
  • Posts: 511
Re: Reduce air compressor noise.
« Reply #10 on: July 05, 2009, 04:52:12 PM »
I installed a 150 HP reciprocating compressor on a 5 yard concrete base mounted on bedrock. It would rattle the windows in the house across the street when the unloader kicked in.