Author Topic: What makes a roadster Modified?  (Read 7164 times)

0 Members and 1 Guest are viewing this topic.

Offline mkilger

  • Sr. Member
  • ****
  • Posts: 997
Re: What makes a roadster Modified?
« Reply #15 on: February 25, 2009, 12:39:33 PM »
Sparky fuel-gas roadster = 143 for body size  and 152 for 33-34 roadsters,  :|

Offline mkilger

  • Sr. Member
  • ****
  • Posts: 997
Re: What makes a roadster Modified?
« Reply #16 on: February 25, 2009, 12:52:30 PM »
The cowl is gone, no body lines ect, looks like mod to me, Stan, Dan, what do you think?  and does it have a 34 grill shell? looks like a 32 ? :roll:

dwarner

  • Guest
Re: What makes a roadster Modified?
« Reply #17 on: February 25, 2009, 12:55:03 PM »
Thee one piece nose was signed off by the roadster committee years ago.

DW

Offline maguromic

  • Hero Member
  • *****
  • Posts: 1736
    • http://www.barringtontea.com
Re: What makes a roadster Modified?
« Reply #18 on: February 25, 2009, 12:56:16 PM »
The rule book says the cowl can be flattened on gas and fuel roadster as  long as the body counter is not lower than the top of the doors.
« Last Edit: February 25, 2009, 12:58:22 PM by maguromic »
“If you haven’t seen the future, you are not going fast enough”

Offline 4-barrel Mike

  • Hero Member
  • *****
  • Posts: 3173
  • Any fool can drive a V8
Re: What makes a roadster Modified?
« Reply #19 on: February 25, 2009, 01:12:55 PM »
Must be the lowest part of the top of the door:



Mike
Mike Kelly - PROUD owner of the V4F that powered the #1931 VGC to a 82.803 mph record in 2008!

Offline mkilger

  • Sr. Member
  • ****
  • Posts: 997
Re: What makes a roadster Modified?
« Reply #20 on: February 25, 2009, 01:15:47 PM »
There is no contour to the cowl= mod roadster?  The front edge the the cowl looks to be cut off  (were the cowl vent was, straght across the front edge?  Contour???  yes look at the photo, thanks mike
« Last Edit: February 25, 2009, 04:27:02 PM by mkilger »

Offline RichFox

  • Hero Member
  • *****
  • Posts: 2663
Re: What makes a roadster Modified?
« Reply #21 on: February 25, 2009, 02:20:47 PM »
I remember when Al Holoway had to put a Plexiglas windshield reveal on this car. As Street Roadsters are required to have now. It was held on with two .030 aluminum tabs and 4 pop rivits. He went 219 with that and it didn't bend, so I guess the revel is in the boundary layer.

Offline Stan Back

  • Hero Member
  • *****
  • Posts: 5889
Re: What makes a roadster Modified?
« Reply #22 on: February 25, 2009, 02:47:40 PM »
Is "contour" the word we're searching for?
Past (Only) Member of the San Berdoo Roadsters -- "California's Most-Exclusive Roadster Club" -- 19 Years of Bonneville and/or El Mirage Street Roadster Records

Offline mkilger

  • Sr. Member
  • ****
  • Posts: 997
Re: What makes a roadster Modified?
« Reply #23 on: February 25, 2009, 04:23:59 PM »
yes Stan thats the word, Dam spell jheck