Please review this article for better seat mounting examples.
http://www.circletrack.com/safety/ctrp_0905_racing_seat_custom_install/index.htmlIt is very important you utilize a minimum of 6 mounting points to the roll cage for the seat mounts.
You will need 4 at the base of the seat utilizing all 4 corners as we as 2 on the upper back to roll cage mount.
The seat must be attached to the drivers safety zone and not to any bodywork.
Any questions about mounting any manufacturers seats and belts can be directed to Kris VanGilder at ISP
Please visit ispseats.com for more information and articles
Thanks,
Scott Wydra