« previous next »
Pages: [1]   Go Down

Author Topic: buell fuel injectors  (Read 9258 times)

0 Members and 1 Guest are viewing this topic.

Offline rascalion

  • New folks
  • Posts: 12
buell fuel injectors
« on: April 13, 2010, 08:33:24 AM »
 :?
after using google and bing and searching thru the links, the question about the flow rate or who builds buell fuel injectors eludes me....can anyone help?
Logged

Offline k.h.

  • Sr. Member
  • ****
  • Posts: 565
Re: buell fuel injectors
« Reply #1 on: April 13, 2010, 09:58:21 AM »
Buell DDFI. Buell's Dynamic Digital Fuel Injection

http://buelltuning.free.fr/injang.htm

Also, you might try badweatherbikers.com and ask your questions in one of the tech forums.  Should get a quick answer from some pretty savvy Buell folk.
« Last Edit: April 13, 2010, 10:23:44 AM by k.h. »
Logged
In theory, there is no difference between theory and practice.  But in practice, there is.--Jan L. A. Van de Snepscheut

Offline firemanjim

  • Sr. Member
  • ****
  • Posts: 399
Re: buell fuel injectors
« Reply #2 on: April 13, 2010, 02:57:06 PM »
What year and model? And what are you trying to do? ECM Spy has freeware to tune early 08 and older bikes. You would need a connector to communicate with your ecm, American Sportbike sells em.And if you are in NCAL I have dyno shop with lots of Buell experience. Edit, that, see you are in Jackson, my shop is at Infineon(Sears Point) Raceway.
Logged
Bonneville 2001,2002,2003,2004,and NO stinking 2005,DLRA 2006, next?
Well,sure can't complain about 2008--6 records over 200 and 5 hats from Bonneville,Bubs, and El Mirage for the team!

Offline rascalion

  • New folks
  • Posts: 12
Re: buell fuel injectors
« Reply #3 on: April 14, 2010, 08:49:01 AM »
the plan,,..a modified frame, 1000cc, push rod, turbo bike based on an 883cc hd
the goal,,,,W O S this sept
still contemplating blow thru carb vs efi
bought a buell intake manifold w/injectors to help the process,,,my buddy Sam Dakin has installed buell injectors and  micro squirt  system on his turbo xl 1200 hd,,he asked if me if i could find the flow rate for his injectors for tuning ,,thinking this easy ,said sure no problem,,,has turned out not to be the case :?
« Last Edit: April 14, 2010, 09:21:14 AM by rascalion »
Logged

Offline Thomas_Cronan

  • Full Member
  • ***
  • Posts: 58
Re: buell fuel injectors
« Reply #4 on: August 02, 2010, 02:57:53 PM »
i have been told that the injectors from the xb's were ford parts?? as to tuning use the ecm spy and mega log program. i have had luck so far, just need a laptop or pda. are they xb9 or 12 injectors? im sure they flow different?
Logged
ECTA 200MPH CLUB@215.4MPH ALL MOTOR
LTA 200MPH CLUB@236.9 TURBO
250MPH CLUB MEMBER

Offline firemanjim

  • Sr. Member
  • ****
  • Posts: 399
Re: buell fuel injectors
« Reply #5 on: August 03, 2010, 02:23:44 PM »
Early tubers were Ford parts,XB's are shorter, IIRC VROD injectors can be made to work and if you are using the Buell tank/pump they offer a different regulator for more pressure and also one from a Dodge V-6 works.Check out the XB board at www.badweatherbikers.com
Logged
Bonneville 2001,2002,2003,2004,and NO stinking 2005,DLRA 2006, next?
Well,sure can't complain about 2008--6 records over 200 and 5 hats from Bonneville,Bubs, and El Mirage for the team!

Offline Thomas_Cronan

  • Full Member
  • ***
  • Posts: 58
Re: buell fuel injectors
« Reply #6 on: August 03, 2010, 05:31:20 PM »
ahh well i was told kinda half way right, i have never messed with my injectors because i have never had  a problem. i have thought about when i redo the motor if i should carb it or bigger injectors and throttle body and fuel pump?
Logged
ECTA 200MPH CLUB@215.4MPH ALL MOTOR
LTA 200MPH CLUB@236.9 TURBO
250MPH CLUB MEMBER
Pages: [1]   Go Up
« previous next »