Author Topic: Getting ready for Bonneville(rebuild)  (Read 1906778 times)

0 Members and 5 Guests are viewing this topic.

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #750 on: August 07, 2009, 08:51:57 AM »
Still a bit windy with a 60% chance of the wet stuff, no clouds in the sky at this time in Wendover.  No real huury to get on the salt yet, be out there probably after 9.  :cheers:

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #751 on: August 07, 2009, 08:39:04 PM »
We got through inspection with a breeze, not much of a wait and the ran down to get gas.  Just a drop
or two and very little wind.  Well get in line in the morning after the drivers meeting and who knows when well run.  Maybe tomorrow but most likely Saturday.  I'll keep everyone updated. :cheers:

Offline sabat

  • Hero Member
  • *****
  • Posts: 1538
Re: Getting ready for Bonneville(rebuild)
« Reply #752 on: August 07, 2009, 10:45:41 PM »
Good luck folks, go get it.

Offline fredvance

  • FVANCE
  • Hero Member
  • *****
  • Posts: 2297
    • Vance and Forstall Racing
Re: Getting ready for Bonneville(rebuild)
« Reply #753 on: August 08, 2009, 12:06:16 AM »
Dean, wish you were here. :-D
WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing

Offline sabat

  • Hero Member
  • *****
  • Posts: 1538
Re: Getting ready for Bonneville(rebuild)
« Reply #754 on: August 08, 2009, 01:08:07 AM »
Believe me, so do I Fred! 

Offline Freud

  • Hero Member
  • *****
  • Posts: 5419
Re: Getting ready for Bonneville(rebuild)
« Reply #755 on: August 08, 2009, 10:34:01 AM »
8:23AM    About 60F and no wind but I'd consider this excellent to run but rather cold as compared to normal

FREUD
Since '63

Offline 55chevr

  • Hero Member
  • *****
  • Posts: 2446
Re: Getting ready for Bonneville(rebuild)
« Reply #756 on: August 08, 2009, 12:00:55 PM »
Freud - enjoy the 60-s temps ... I doubt it will stay that cool very long ... say hello to Glen for me ... Joe

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #757 on: August 08, 2009, 08:26:39 PM »
We made first shake down run about an hour ago, 2 1/4 speed of 243.747 first mile 258.881 middle we shut down 3/4 of the way through do to two header pipes breaking and we still went 286.367mph.  We are welding the pipes up now and will run again tomorrow with a leaner tune.   :cheers:

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #758 on: August 09, 2009, 12:23:26 AM »
A little update.  We had to take off the other header as well.  It would have broke on the next run, next meet we will need new zoomies.  We will put the headers back on in the morning and give it another go. :-D

Offline t russell

  • Sr. Member
  • ****
  • Posts: 579
Re: Getting ready for Bonneville(rebuild)
« Reply #759 on: August 09, 2009, 11:05:52 AM »
 :cheers:
thanks for update
terry

Offline Cajun Kid

  • Rajun Cajun Racing E/CGALT 5690
  • Hero Member
  • *****
  • Posts: 3189
  • Venable Rod's & Racing #805 Studebaker, #806 Ford
Re: Getting ready for Bonneville(rebuild)
« Reply #760 on: August 09, 2009, 11:19:55 AM »
Good Luck  B'ville,,,,  Keep us updated,,, be safe, and go Fast...

Charles
ECTA Record Holder Maxton
E/CBFALT, E/CBGALT, E/CGALT, E/CFALT, A/CGALT, C/CGALT, D/CGALT, C/CBGALT, B/CBGALT, C/CFALT
OHIO
B/CGALT, C/CGALT

LTA Record Holder and 200 Club Member
A/CBFALT, B/CBFALT, C/CBFALT, C/CFALT, C/CGALT,   E/CGALT, E/CFALT

Fastest Standing Mile at Ohio  203.343mph
Fastest Standing Mile at Maxton 196.967mph
Fastest Standing 1.5 Mile at Loring 213.624mph
Fastest Standing Mile at Loring 204.109mph

http://s261.photobucket.com/albums/ii43/cajunkid5690/

Blog    www.venablerodsandracing.com
email   venableracing@gmail.com

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #761 on: August 09, 2009, 12:56:40 PM »
We started it up a few minutes ago and found out we spun the key way off the crank pulley.  We will fix it and run later in the day.  I guess that's what 36lbs of boost will do to it. :-o

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #762 on: August 10, 2009, 11:54:09 AM »
We are headed toward salt lake to Chapman racing heads for a head job I mean valve replacement/valve job on both heads.  Should be racing again tomorrow. :cheers:

Offline bvillercr

  • Hero Member
  • *****
  • Posts: 2291
Re: Getting ready for Bonneville(rebuild)
« Reply #763 on: August 10, 2009, 04:38:02 PM »
We ordered all new valves.  3 intake and 3 exhaust valves were bent so we over nighted all new stuff.  The heads will be done tomorrow around noon.  Should be racing on Wednesday. :cheers:

Offline t russell

  • Sr. Member
  • ****
  • Posts: 579
Re: Getting ready for Bonneville(rebuild)
« Reply #764 on: August 10, 2009, 04:56:26 PM »
Good luck
terry :cheers: :cheers: :cheers: