Street Roadster is one of the traditional classes, so I am keeping it (mostly) within real (not current magazine) tradition: '29 A roadster, Model A frame.
I'm spending extra time to keep it as inexpensive as possible, while building it to be as safe as possible.
The frame will be boxed from the front cross member rearward, stepped in the rear, and will have an X-member & pedal setup from Dagel's
http://www.dagelsstreetrods.com/super_x_crossmember.htmThe Dagel parts are yet to be purchased.
The front end will be a vintage dropped axle with split wishbones, F-1 spindles and hubs and no brakes, F-1 steering. I have all of these parts in hand.
The rear will probably be a 9" Ford (a quick change would be preferred, but that may have to wait until next year) on a buggy spring with ladder bars. I have most of these parts.
The engine will be a built flathead "B" coupled to a T-5 5-speed. I have these parts.
What I started with (attached).
Mike