What happened Tom? That does not look good.
Pete
HOLY SCHEISENHOSEN!
and
That will put a serious dent in your credit card and future IRA deposits,
Sorry; I can really empathize, having been there, done that.....etc.
Good Luck!
Jim
I got it started using the starting rollers after not running for at least 6 months. It turned over really hard so when it did start, I didn't want to let go of the throttle. I reached over the bike with my left hand (clutch hand) and pulled the shifter to get it into neutral, but I pulled too hard and it went into 1st. Apparently, the layshaft couldn't take the acceleration required to bring the wheel down to speed and it snapped a tooth which jammed between the layshaft and the mainshaft sleeve gear forcing the layshaft down - - - clear thru the bottom of the cases.
Needless to say I need some parts - - - like new cases, layshaft, sleeve gear, etc - - - and a bunch of machining of the cases to fit the oversize bore. Parts are on the way and expected by Thursday, giving me the weekend to put it back together.
Tom