Author Topic: Jacque Vizard memorial Ford 302 engine  (Read 3300 times)

0 Members and 1 Guest are viewing this topic.

Offline WOODY@DDLLC

  • Hero Member
  • *****
  • Posts: 1803
  • ECTA made it to AR-Kansas!
    • Design Dreams, LLC
Jacque Vizard memorial Ford 302 engine
« on: November 08, 2015, 06:52:22 PM »
I'm posting this [verbatim] for my friend David Vizard.

Attached is a photo of the re-built engine that my daughter Jacque built the long block for primarily to test cylinder heads for my SB Ford book.  After the testing was done she used much of the short block to re-build the engine for the 1969 Boss 302 Mustang she was to race for car owner Thad Cook. I did not want to rebuild this engine in the form of the race engine for at 525 hp I was concerned about its life and the point of using it as a memorial was that it would last a long time hence the rebuild in a lower output form previous to that.

I want to take this opportunity to thank you and all others concerned for the contributions toward making this happen. Rebuilding this engine has repeatedly taken me back to the times when Jacque and I would work in the shop together. Times that will never be again.

When news of Jacque’s passing spread the amount of response my wife Josephine and I received was overwhelming. We had many suggestions that we should organize something and in some way memorialize her. The re-building of this engine is just the start of this and the way it is being done is the sum of all the best idea’s sent to us by so many well-wishers worldwide.

The plan with this engine is to sell it to someone who has a nice 1969 Mustang that will be well maintained as a show car as much as anything. Failing that the installation into a nice Fox bodied Mustang would also work. The asking price of the engine is $6850 which is less than the cost of the parts. The proceeds from this will go toward the construction of the memorial on the site where Jacque passed.  This is in a very secluded scenic spot in the woods of a local land owner who has graciously allowed us to dedicate and develop this location in Jacque’s memory. 

Selling this engine is critical to the start of the memorial site development. If you can use your social media to make it known that this engine is available I am sure that would of help. It is being advertised on Terry Walters Engines site at   http://www.twperformanceparts.com/index.php?route=product/product&path=88_90&product_id=5538 where a full technical spec of the engine is given. It is also advertised on EBay at:- http://www.ebay.com/itm/121806099595 Also more on the drive to bring about the construction of the memorial site is on my Facebook page at https://www.facebook.com/DavidVizardAuto and https://www.facebook.com/david.vizard.56.
All models are wrong, but some are useful! G.E. Box (1967) www.designdreams.biz

Offline Seldom Seen Slim

  • Nancy and me and the pit bike
  • Administrator
  • Hero Member
  • ***
  • Posts: 13158
  • Nancy -- 201.913 mph record on a production ZX15!
    • Nancy and Jon's personal website.
Re: Jacque Vizard memorial Ford 302 engine
« Reply #1 on: November 08, 2015, 09:10:55 PM »
For those of you that might think to ask -0- Woody secured my permission before posting the above ad. :-D
Jon E. Wennerberg
 a/k/a Seldom Seen Slim
 Skandia, Michigan
 (that's way up north)
2 Club member x2
Owner of landracing.com