I have read the rule book, and looked at pictures of motorcycles in the same class, the streamlining to the rear of the rider varies a lot, as the rule stated you must be able to see the rider completely from the sides and above. Every picture I looked at had some portion of the rider not clearly visible from the sides, The back of the calf , and heel are the most common.
The question about the handlebars were confusing because on this particular motorcycle the "mount" which cannot be moved, is the bar itself. The clip on ( mount) and bar are 1 piece. I assume the rule means that and bar can be used if is utilizes the stock mount, in my application I have to change the mount to get the "shaoe" I want.
Likewise there are no provisions to lower the stock motorcycle (except reducing preload which alteres the suspension set up) So the question is can I run lowering links to get the bike down to the manufactirers minimum ride height and be legal in P-P.
I might be too critical in how I am reading the book but I really dont want have any problems in tech.
Thanks