(Note: LANDRACING.COM donations are not tax deductible)


This is a public forum. The opinions expressed here don't
necessarily reflect the feelings of The Folks That Run The Site (that's us)
unless we explicitly say so, ok?


Author Topic: Honda B or D 16 or similar 78 mm 13-14:1 pistons  (Read 1225 times)

0 Members and 1 Guest are viewing this topic.

Offline real norton

  • New folks
  • Posts: 18
Honda B or D 16 or similar 78 mm 13-14:1 pistons
« on: August 10, 2014, 08:21:10 PM »
  I am looking for forged Honda B or d16 or similar 78mm 13-14:1piston or pistons
  If they are useable I need to know the compression height if useable only for mock up 1 will do
  Thanks Carl Real Norton

Offline wobblywalrus

  • Hero Member
  • *****
  • Posts: 5308
  • Age: 67
  • Location: backwoods Oregon
Re: Honda B or D 16 or similar 78 mm 13-14:1 pistons
« Reply #1 on: August 10, 2014, 11:30:30 PM »
Did you type those pistons into an internet search engine?

Offline Old Scrambler

  • Sr. Member
  • ****
  • Posts: 697
  • Age: 73
  • Location: Wherever I park the RV
  • Going Fast - Slowly
Re: Honda B or D 16 or similar 78 mm 13-14:1 pistons
« Reply #2 on: August 12, 2014, 09:03:53 PM »
Assume for a motorcycle?  Probably aftermarket?  Pin size?  2-Valve or 4? I'm guessing your looking for some CB450 or CB500T pistons to adapt? 

More info will get better results.............just for giggles..........take a look at automobile units made for racing applications.  :-)
2011 AMA Record - 250cc M-PG TRIUMPH Tiger Cub - 82.5 mph
2013 AMA Record - 250cc MPS-PG TRIUMPH Tiger Cub - 88.7 mph
2018 AMA Record - 750cc M-CG HONDA CB750 sohc - 136.6 mph
2018 AMA Record - 750cc MPS-CG HONDA CB750 sohc - 143.005 mph
2018 AMA Record - 750cc M-CF HONDA CB750 sohc - 139.85 mph
2018 AMA Record - 750cc MPS-CF HONDA CB750 sohc - 144.2025 mph

Chassis Builder / Tuner: Dave Murre

Offline real norton

  • New folks
  • Posts: 18
Re: Honda B or D 16 or similar 78 mm 13-14:1 pistons
« Reply #3 on: August 12, 2014, 11:05:03 PM »
Assume for a motorcycle?  Probably aftermarket?  Pin size?  2-Valve or 4? I'm guessing your looking for some CB450 or CB500T pistons to adapt? 

More info will get better results.............just for giggles..........take a look at automobile units made for racing applications.  :-)
  Thanks Dave
The head is based on a B16 combustion chamber and it appears b or d pistons will work
I have ordered a combustion chamber casting kit and soon will have copy's to send to a number of manufactures
Seems most have an application for it  Thanks again Carl realnorton