Author Topic: harness bar  (Read 6827 times)

0 Members and 1 Guest are viewing this topic.

Offline mxnuke

  • New folks
  • Posts: 10
harness bar
« on: July 07, 2013, 09:42:04 PM »
New to standing mile stuff but after going to the 1st 3 ohio races,im hooked.After the april meet i came home and sold my drag car,bought a c4 corvette with a 427 sb and a 6-speed.Got a rule book but i see the c5 and up corvettes are allowed to run a harness bar up to 150 mph.The c4 shares the same style high strength steel factory halo bar as the c5.I did not see any c4 cars to ask,only one i seen had a full cage.I found both chassis pics on-line,so could i use a harness bar or will i need a 4pt bar?  If this is not the right place to ask,sorry. i will join esta for next year,i wont have safety stuff done by sept. Thanks,Dennis

Offline MIKE MATY

  • Full Member
  • ***
  • Posts: 180
Re: harness bar
« Reply #1 on: July 09, 2013, 10:23:26 AM »
This is the right place. I believe the c4 falls under the harness bar category. If the rule book says c5 and up it needs to get run by those who are in charge. I'll have to check my rule book when I get home for clarification. If its not in there I can find out for you. Joe Timney is tending too his wife, Keith Turk would be the next in line but he's on the 9-5.

Sincerely,

Your friendly tech inspector. 
ECTA 200MPH CLUB Maxton
A/FRS      205.531
D/FSS      159.427
ECTA 200MPH CLUB Ohio
A/FRS       208.530
2013 Hot Rod Top Speed Challenge Winner

Offline MIKE MATY

  • Full Member
  • ***
  • Posts: 180
Re: harness bar
« Reply #2 on: July 09, 2013, 12:04:15 PM »
I talked to Joe and did some research. It looks like the c4 has an integrated birdcage structure with a "hoop" behind the drivrs head just like a c5. You are are good to go on the harness bar. I sent Joe the link and he will make changes to the rule book as needed. Please Please Please read the rule book very very carefully harness mounting. Shoulder harnesses must go thru the seat and not around the outside they also can not rub and part of the seat. Make sure you get a good solid bar. Try Arizona Speed you'll need to call them they don't list corvette bars on there web site. I have owned one of there bars when I had my c5.
« Last Edit: July 09, 2013, 12:06:00 PM by MIKE MATY »
ECTA 200MPH CLUB Maxton
A/FRS      205.531
D/FSS      159.427
ECTA 200MPH CLUB Ohio
A/FRS       208.530
2013 Hot Rod Top Speed Challenge Winner

Offline Captthundarr

  • Hero Member
  • *****
  • Posts: 1475
  • In line
Re: harness bar
« Reply #3 on: July 09, 2013, 12:58:20 PM »
Mike, not that it matters to me much, were is this in the rule book? Since I spend a lot of my day filpping through "Da Book"
Live,Laugh, Love /  Jack Scratch Racing /ECTA   
Amy Hartman-Driver, Frank Hartman-everthing else.
C/GALT 137.65 Ohio Mile check that 144.12 2013, AA/GALT 159.34 Ohio Mile 2014. B/GALT 180.577 RECORD 6/15

Offline mxnuke

  • New folks
  • Posts: 10
Re: harness bar
« Reply #4 on: July 09, 2013, 02:41:22 PM »
Thanks for your help. I spoke to a few vette racers and they are the ones who told me about the harness bar deal.At some point in time i will put a roll bar in. But to get my feet wet first im going to go with a harness bar and a racing seat and belts. thanks again,i am sure this will not be my last question...lol..Dennis

Offline fredvance

  • FVANCE
  • Hero Member
  • *****
  • Posts: 2297
    • Vance and Forstall Racing
Re: harness bar
« Reply #5 on: July 09, 2013, 03:32:28 PM »
Dennis bring it to the Houston Mile in October. :cheers:
WORLDS FASTEST PRODUCTION MOTORCYCLE 213.470
Vance&Forstall Racing
WOS 2011 235+MPH
Engine by Knecum, Tuned by Johnny Cheese.
Sponsers Catalyst Composites, Johnny Cheese Perf, Knecum Racing Engines, Murray Headers, Carpenter Racing

Offline MIKE MATY

  • Full Member
  • ***
  • Posts: 180
Re: harness bar
« Reply #6 on: July 09, 2013, 05:39:18 PM »
Mike, not that it matters to me much, were is this in the rule book? Since I spend a lot of my day filpping through "Da Book"

I don't have it in front of me. I believe its under the 150mph requirements. It reads something like; vehicles such as the c5 corvette or dodge viper manufactured with an integrated roll structure......
ECTA 200MPH CLUB Maxton
A/FRS      205.531
D/FSS      159.427
ECTA 200MPH CLUB Ohio
A/FRS       208.530
2013 Hot Rod Top Speed Challenge Winner

Offline mxnuke

  • New folks
  • Posts: 10
Re: harness bar
« Reply #7 on: July 09, 2013, 07:57:46 PM »
My son lives in abilene so maybe someday.This motor is efi and its a steep learning curve for me.Thanks for the info. I only live 85 miles from the ohio track.Here is the dyno pull video [ if i  can get it to work ] lol.

Offline mxnuke

  • New folks
  • Posts: 10
Re: harness bar
« Reply #8 on: July 09, 2013, 08:03:37 PM »
Oh well....