« previous next »
Pages: [1]   Go Down

Author Topic: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank  (Read 7515 times)

0 Members and 1 Guest are viewing this topic.

Offline dr j

  • Full Member
  • ***
  • Posts: 143
  • Honda CRF250 & RS125 & 1954 Moto Parilla 175
Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
« on: June 17, 2013, 11:16:43 PM »
I am building a small fuel tank for my LSR bike.  It will be aluminum and I am looking for a non-recessed but vented cap and aluminum weld-in bung.  I used an ACS flush fuel cap 10600 from Aircraft Spruce on my last build.  But it was too recessed and prevented my using the full capacity of the tank.  Any specific ideas?
Thanks
Logged
Jarl- Moto Madcap
Sharpsburg MD
BUB2012- Morini 350- 4 Mod Pushrod records, Parilla 175- M-VG rec
250cc 4stroke Nitrous Motorcycle- 131.8mph
250/4 Naked Motorcycle-115.6mph
APS/F-125/2 115.2mph
P/PV-175/4 Moto Parilla-59.7mph
29 Retired Maxton Class Records on 3 bikes and 4 engines

Offline Peter Jack

  • Hero Member
  • *****
  • Posts: 3776
Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
« Reply #1 on: June 18, 2013, 01:18:34 AM »
That's such a nice cap assembly, is it possible to design your tank with a raised portion in which to mount the assembly?

Pete
Logged

Offline saltwheels262

  • Hero Member
  • *****
  • Posts: 1085
  • LTA 7/2013
Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
« Reply #2 on: June 18, 2013, 07:44:11 AM »
summit and jegs have caps with bungs. aluminum.

the bungs can be shortened to sit flush with the top of your tank.

franey
Logged
bub '07 - 140.293 a/pg   120" crate street mill  
bub '10 - 158.100  sweetooth gear
lta  7/11 -163.389  7/17/11; 3 run avg.-162.450
ohio -    - 185.076 w/#684      
lta 8/14  - 169.xxx. w/sw2           
'16 -- 0 runs ; 0 events

" it's not as easy as it looks. "
                            - franey  8/2007

Offline Old Scrambler

  • Sr. Member
  • ****
  • Posts: 721
  • Going Fast - Slowly
Re: Vented Aluminum fuel Cap and weld bung for motorcycle custom tank
« Reply #3 on: June 20, 2013, 08:03:01 PM »
Monza-Style flip-lid on ebay..........numerous vendors in UK and Continent offer 2 sizes with weld-bungs.
Logged
2011 AMA Record - 250cc M-PG TRIUMPH Tiger Cub - 82.5 mph
2013 AMA Record - 250cc MPS-PG TRIUMPH Tiger Cub - 88.7 mph
2018 AMA Record - 750cc M-CG HONDA CB750 sohc - 136.6 mph
2018 AMA Record - 750cc MPS-CG HONDA CB750 sohc - 143.005 mph
2018 AMA Record - 750cc M-CF HONDA CB750 sohc - 139.85 mph
2018 AMA Record - 750cc MPS-CF HONDA CB750 sohc - 144.2025 mph

Chassis Builder / Tuner: Dave Murre
Pages: [1]   Go Up
« previous next »