Author Topic: Centerline spindle mounts  (Read 5718 times)

0 Members and 1 Guest are viewing this topic.

Offline spongebob

  • New folks
  • Posts: 4
Centerline spindle mounts
« on: June 13, 2013, 12:39:03 PM »
Excellent pair of 17x2.25 dragster front spindle mounts for Anglia, with Goodyears.  Includes bearings and caps.  Tires show no wear, but slight sidewall checking.  $300 plus shipping.  Can bring to World of Speed in September.



Offline John Noonan

  • Hero Member
  • *****
  • Posts: 3606
  • 306 200+ mph time slips. 252 mph on a dirtbike
Re: Centerline spindle mounts
« Reply #1 on: June 14, 2013, 01:22:06 AM »
I will take them for 325 shipped...Have a new project on the horizon.

Offline salt27

  • Hero Member
  • *****
  • Posts: 1734
Re: Centerline spindle mounts
« Reply #2 on: June 14, 2013, 09:19:47 AM »
S-Bob,
What, no call? :?

Oh well, you saved me 300 clams. :-D

I'm sure John will get them salty before I would have.

 Don

Offline spongebob

  • New folks
  • Posts: 4
Re: Centerline spindle mounts
« Reply #3 on: June 14, 2013, 10:07:31 AM »
I will take them for 325 shipped...Have a new project on the horizon.

Thanks, John.  What's your zip?  I'll check on shipping this morning.
Jerry

Offline John Noonan

  • Hero Member
  • *****
  • Posts: 3606
  • 306 200+ mph time slips. 252 mph on a dirtbike
Re: Centerline spindle mounts
« Reply #4 on: June 14, 2013, 10:15:30 AM »
Don if you want them you can have em..if not Zip Code is 92649 shipping to a business..



John

Offline Stainless1

  • Administrator
  • Hero Member
  • ***
  • Posts: 8948
  • Robert W. P. "Stainless" Steele
Re: Centerline spindle mounts
« Reply #5 on: June 14, 2013, 10:26:04 AM »
What'ca building John, souonds like it might have too many wheels for a scooter
Stainless
Red Hat 228.039, 2001, 65ci, Bockscar Lakester #1000 with a little N2O

Offline John Noonan

  • Hero Member
  • *****
  • Posts: 3606
  • 306 200+ mph time slips. 252 mph on a dirtbike
Re: Centerline spindle mounts
« Reply #6 on: June 14, 2013, 11:29:15 AM »
12 engine GSXR 1000 liner  :-D  :mrgreen:


N o t

Offline spongebob

  • New folks
  • Posts: 4
Re: Centerline spindle mounts
« Reply #7 on: June 14, 2013, 03:15:32 PM »
Sold.  Thanks.

Offline Speed Limit 1000

  • Hero Member
  • *****
  • Posts: 1396
Re: Centerline spindle mounts
« Reply #8 on: June 14, 2013, 07:46:55 PM »
12 engine GSXR 1000 liner  :-D  :mrgreen:


N o t

I understand 3 will make one go fairly fast :cheers:
John Gowetski, red hat @ 221.183 MPH MSA Lakester, Bockscar #1000 60 ci normally aspirated w/N20

Offline salt27

  • Hero Member
  • *****
  • Posts: 1734
Re: Centerline spindle mounts
« Reply #9 on: June 14, 2013, 08:46:51 PM »
Don if you want them you can have em..if not Zip Code is 92649 shipping to a business..



John

Thanks for the offer John, but I will just wait until you get the records set that that you need to set and then buy them from you. :-D

  Don

Offline John Noonan

  • Hero Member
  • *****
  • Posts: 3606
  • 306 200+ mph time slips. 252 mph on a dirtbike
Re: Centerline spindle mounts
« Reply #10 on: June 19, 2013, 02:18:24 PM »
Wheels received in great shape, thank you,   :cheers:

John

Offline fastman614

  • Sr. Member
  • ****
  • Posts: 724
Re: Centerline spindle mounts
« Reply #11 on: June 20, 2013, 12:31:46 PM »
Just so you all know... We ran that tire size with Weldwheel Drag-Lites on our lakester until 2009. (Remember that Cliff Gullett had been fatally injured in a crash at "BUB" the year earlier) There was A LOT of negativity directed towards us as to the legality of running those wheels/tires with one inspector even sticking his nose into the inspection process of which he was no part and stating as if it was fact that the tires WERE NOT LEGAL TO RUN! (After, on my part, a dressing down of that inspector, he conceded that, if it was up to him, they would be illegal blah blah blah...)

We went through run by run scrutiny of the tires... When we "popped" one, they were all over us about that was exactly what they expected to have happen - until a good look showed that we had apparently run over something that had cut the tire (something like a DZUS button). We were sort of speed limited to 225mph for the first part of the week anyway- and since we had licensing passes for two drivers, the speed limitation was not a huge issue to us. I think that we had, by the end of that week, done eleven runs and had pretty much proven that the tires were okay to run on the salt - at least up to 225mph.

My advice then is to get in touch with Lee Kennedy about your specific application and expected speeds of these tires and find out what, if any concerns may yet linger.
No s*** sticks to the man wearing a teflon suit.

Offline Rex Schimmer

  • Hero Member
  • *****
  • Posts: 2626
  • Only time and money prevent completion!
Re: Centerline spindle mounts
« Reply #12 on: July 02, 2013, 04:40:57 PM »
As I understand these tires are not now allowed over anything that exceeds 200 mph. Per Goodyear engineering at 275 the bead comes off of the rim after about 5-6 seconds and this has happened with these tires at Bonneville in 2009 or 2010 on a C/GL at 278.

Rex
Rex

Not much matters and the rest doesn't matter at all.