Gears

[thundersalt]

Looking for QC gears for a B&J rear end. Want final close to 2:75. Rear end has 3:07 ring gear. Tooth count 28/25, 29/26 ??

[desotoman]

Brian,

Any pictures of the rearend as I have never seen a B&J Quickchange. Also do they take the standard 10 spline champ gears or are they different? Example: The Winters extremeliner quickchange takes its own special quickchange gears.

Tom G.

[thundersalt]

They are different than "normal" QC's. I don't think there are that many on the salt. From what I hear Hammonds lakester has the same rear end.
29 spline x 1.25 shaft

[thundersalt]

Here's a photo of the 25/30  2:56 set

[AJR192]

Might contact Strasburg's in Lindon Utah as they own B&J.

[desotoman]

Brian,

Thanks for the pictures. That is one heavy duty QC. Those gears are pretty HD also. Are they around 5 inches center to center? Looks much bigger than a Champ center to center.

Thanks again,

Tom G.

[thundersalt]

Might contact Strasburg's in Lindon Utah as they own B&J.

I talked to him last year and at the time he didn't have any. I emailed him last week and haven't heard back so I thought I would start putting out the feelers now.